Products from JOJO

Water cooling jacket for electric motors with a diameter of 28 mm This water cooling jacket is suitable for cooling various electric motors with a housing diameter of 28 mm. It is particularly designed for use in RC model boats with enclosed electronics compartments, where the motor can quickly overheat due to a lack of cooling air....

Position lights with board. Wood and metal kit. Not suitable for lighting Contents: 1 pair Technical specifications: Length 22 mm Height 6 mm

Shaping & Bending Tip – a handy accessory for bending wooden planks for model ships With the Shaping & Bending Tip , you can expand the capabilities of your soldering iron to include a practical solution for precise shaping and bending work in model-making. It is particularly suitable for bending wooden planks for model ships and...

Servo Y-connection cable 15 cm – with Futaba connectors for 2 servos or ESC This servo Y-connection cable (15 cm) with Futaba-compatible plugs enables the parallel connection of two servos or two speed controllers (ESC) to one receiver channel. It ensures reliable signal transmission and a stable power supply – ideal for RC aeroplanes,...

Preiswerte Wellenanlage für große Schiffsmodelle. Die 5mm Edelstahl Welle läuft leicht auf 2 Bronzelagern im Messing Stevenrohr. Schraubenseitig befindet sich ein Teflon Drucklager. Die Welle wird über einen Stellring motorseitig gesichert. Technische Daten: Länge gesamt : 300mm Länge: Stevenrohr: 240mm Durchmesser Welle motorseitig:...

The 5mm stainless steel shaft runs smoothly on 2 bronze bearings in the brass stern tube. There is a Teflon thrust bearing on the screw side. The shaft is secured on the motor side with a set collar. Technical data: Total length: 350mm Length: stern tube: 300mm Diameter of shaft on motor side: 5mm Diameter of stern tube: 10mm Propeller...

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M3 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M3 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M5 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller with secure set screw left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

2-blade propeller left-turning for models with one drive shaft, made of red nylon with M4 brass threaded insert. Well suited for self-built models to test the correct drive configuration.

Cutter knife set with storage box and 6 interchangeable blades. High-quality knife handle with anti-slip rubber in the finger area and aluminium handle. Also suitable for stronger hands. The knife sits comfortably in the hand and allows sensitive and precise work on the workpiece. The blade change mechanism can accommodate blades with...

Ring mandrel mandrel for winding rings and eyelets. It is also great for working with photo-etched parts. The hexagonal holder fits into all standard bit holders or can be easily clamped in a vice. Mandrel with graduations of 0.5mm each from 1.5-3.5mm

Compact boat shaft with a very good price/performance ratio. The particularly slim design should be emphasised. The motor can be mounted quickly and easily with a rigid direct coupling via the aluminium motor flange. The shaft is made of stainless steel with two axial and one radial PTFE bearings. The stern tube is made of brass and an...

Suppression set for model brush motors consisting of 3 capacitors which must be soldered between the poles and the housing. prevents high frequency (HF) interference and is required by law, especially older remote controls are sensitive to this type of interference.

A beautiful Riva model necessarily needs a powerful drive. With this set we have put together a drive that is fast but does not go to the limits of what is technically possible. The shafts are mounted on two bearings and are absolutely maintenance-free. The rudders are made of plastic and comply with the manufacturer's...

Edelstahl Schiffswelle Durchmesser 5mm Länge 350mm Gewinde M4

Edelstahl Schiffswelle Durchmesser 5mm Länge 350mm Gewinde M5

Screw M3x8 hexagon socket Cylinder head Stainless steel 2 pieces

Craft Applications - Whether you are cutting 1/2" square basswood strips or 1" wide sheets, the Easy Cutter Ultimate provides a fast way to cut parts to length.

Replacement blade for Ultimate Cutter

Fireproof Lipo Battery Safe Bag

Chrom Scheuerleiste / Stoßkante für Modellboote aus Metall

Metal Whindshield for Riva Models Scale 1:10

Tube Bender for rod and tube up to 3.2mm

Spannzange Leimzange Leimzwinge Set kräftige Zwinge mit kleinem Spannbereich

Schraube M2.5x8 Zylinderkopf ideal zur Motorbefestigung

Schraube M2.5x5 Zylinderkopf ideal zur Motorbefestigung

Schraube M3x5 Zylinderkopf ideal zur Motorbefestigung

Bowdenzug fertig konfektioniert 500mm M2 Anschluss

Schiffswelle mit Motorflansch passend für 400er Motore